Meropenem

Active ingredient: Meropenem

In short: Meropenem for injection is indicated for the treatment of complicated skin and skin structure infections (cSSSI) due to Staphylococcus aureus (methicillin-susceptible isolates only), Streptococcus pyogenes, Streptococcus agalactiae, viridans group streptococci, Enterococcus faecalis (vancomycin-susc

Forms & strengthsSingle dose clear glass vials of meropenem for injection containing 500 mg or 1 gram (as the trihydrate blended with anhydrous sodium carbonate for re-constitution) of sterile meropenem powder.
LabelSavior Lifetec Corporation
Label updatedNov 03, 2026

What is Meropenem used for?

Meropenem for injection is indicated for the treatment of complicated skin and skin structure infections (cSSSI) due to

Staphylococcus aureus (methicillin-susceptible isolates only),

Streptococcus pyogenes, Streptococcus agalactiae, viridans group streptococci,

Enterococcus faecalis (vancomycin-susceptible isolates only),

Pseudomonas aeruginosa, Escherichia coli, Proteus mirabilis, Bacteroides fragilis, and Peptostreptococcus species

.

Meropenem for injection is indicated for the treatment of complicated appendicitis and peritonitis caused by viridans group streptococci,

Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Bacteroides fragilis, B. thetaiotaomicron, and Peptostreptococcus species

.

Meropenem for injection is indicated for the treatment of bacterial meningitis caused by

Haemophilus influenzae, and

Neisseria meningitidis and penicillin-susceptible isolates of Streptococcus pneumoniae.

Meropenem for injection has been found to be effective in eliminating concurrent bacteremia in association with bacterial meningitis.

To reduce the development of drug-resistant bacteria and maintain the effectiveness of meropenem for injection and other antibacterial drugs, meropenem for injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. …

Meropenem dosage

The recommended dose of meropenem for injection is 500 mg given every 8 hours for skin and skin structure infections and 1 gram given every 8 hours for intra-abdominal infections. When treating complicated skin and skin structure infections caused by

P.aeruginosa, a dose of 1 gram every 8 hours is recommended.

Meropenem for injection should be administered by intravenous infusion over approximately 15 minutes to 30 minutes. Doses of 1 gram may also be administered as an intravenous bolus injection (5 mL to 20 mL) over approximately 3 minutes to 5 minutes.

Dosage should be reduced in patients with creatinine clearance of 50 mL/min or less.

When only serum creatinine is available, the following formula (Cockcroft and Gault equation)

1may be used to estimate creatinine clearance.

Males: Creatinine Clearance (mL/min) =

Weight (kg) × (140 - age)

72 × serum creatinine (mg/dL)

Females: 0.85 × above value

Table 1: Recommended Meropenem for Injection Dosage Schedule for Adult Patients with Renal Impairment

Creatinine Clearance

(mL/min) | Dose (dependent on type of infection) | Dosing Interval

Greater than 50 | Recommended dose (500 mg cSSSI and 1 gram Intra-abdominal) | Every 8 hours

26-50 | Recommended dose | Every 12 hours

10-25 | One-half recommended dose | Every 12 hours

Less than 10 | One-half recommended dose | Every 24 hours

There is inadequate information regarding the use of meropenem for injection in patients on hemodialysis or peritoneal dialysis.

Pediatric Patients 3 Months of Age and Older

For pediatric patients 3 months of age and older, the Meropenem for Injection dose is 10 mg/kg, 20 mg/kg or 40 mg/kg every 8 hours (maximum dose is 2 grams every 8 hours), depending on the type of infection (cSSSI, cIAI, intra-abdominal infection or meningitis). See

dosing Table 2 below.

For pediatric patients weighing over 50 kg administer meropenem for injection at a dose of 500 mg every 8 hours for cSSSI, 1 gram every 8 hours for cIAI and 2 grams every 8 hours for meningitis.

Administer meropenem for injection as an intravenous infusion over approximately 15 minutes to 30 minutes or as an intravenous bolus injection (5 mL to 20 mL) over approximately 3 minutes to 5 minutes.

There is limited safety data available to support the administration of a 40 mg/kg (up to a maximum of 2 grams) bolus dose.

Table 2: Recommended Meropenem for Injection Dosage Schedule for Pediatric Patients 3 Months of Age and Older with Normal Renal Function

Type of Infection | Dose (mg/kg) | Up to a Maximum Dose | Dosing Interval

Complicated skin and skin structure infections | 10 | 500 mg | Every 8 hours

Complicated intra-abdominal infections | 20 | 1 gram | Every 8 hours

Meningitis | 40 | 2 grams | Every 8 hours

There is no experience in pediatric patients with renal impairment. …

How to take Meropenem — instructions & advice from the label

Counsel patients that antibacterial drugs including meropenem for injection should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When meropenem for injection is prescribed to treat a bacterial infection, tell patients that although it is common to feel better early in the course of therapy, take the medication exactly as directed. Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by meropenem for injection or other antibacterial drugs in the future.

Counsel patients that diarrhea is a common problem caused by antibacterial drugs which usually ends when the antibacterial drug is discontinued. Sometimes after starting treatment with antibacterial drugs, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibacterial drug. If this occurs, patients should contact their physician as soon as possible

. …

Warnings & precautions

Do not take this medicine if: Meropenem is contraindicated in patients with known hypersensitivity to any component of this product or to other drugs in the same class or in patients who have demonstrated anaphylactic reactions to beta (β)-lactams.

Serious and occasionally fatal hypersensitivity (anaphylactic) reactions have been reported in patients receiving therapy with β-lactams. These reactions are more likely to occur in individuals with a history of sensitivity to multiple allergens.

There have been reports of individuals with a history of penicillin hypersensitivity who have experienced severe hypersensitivity reactions when treated with another β-lactam. Before initiating therapy with meropenem, it is important to inquire about previous hypersensitivity reactions to penicillins, cephalosporins, other β-lactams, and other allergens. If an allergic reaction to meropenem occurs, discontinue the drug immediately.

Severe cutaneous adverse reactions (SCAR) such as Stevens-Johnson syndrome (SJS), toxic epidermal necrolysis (TEN), drug reaction with eosinophilia and systemic symptoms (DRESS), erythema multiforme (EM) and acute generalized exanthematous pustulosis (AGEP) have been reported in patients receiving meropenem

. If signs and symptoms suggestive of these reactions appear, meropenem should be withdrawn immediately and an alternative treatment should be considered.

Rhabdomyolysis has been reported with the use of meropenem

. If signs or symptoms of rhabdomyolysis such as muscle pain, tenderness or weakness, dark urine or elevated creatine phosphokinase are observed, discontinue meropenem for injection and initiate appropriate therapy.

Seizures and other adverse CNS experiences have been reported during treatment with meropenem. …

Meropenem side effects

The following are discussed in greater detail in other sections of labeling:

Hypersensitivity Reactions

Severe Cutaneous Adverse Reactions

Rhabdomyolysis

Seizure Potential

Risk of Breakthrough Seizures Due to Drug Interaction with Valproic Acid

Clostridioides difficile- associated Diarrhea

Development of Drug-Resistant Bacteria

Overgrowth of Nonsusceptible Organisms

Thrombocytopenia

Potential for Neuromotor Impairment

Because clinical trials are conducted under widely varying conditions, adverse reactions rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice.

Adult Patients:

During clinical investigations, 2904 immunocompetent adult patients were treated for non-CNS infections with meropenem (500 mg or 1 gram every 8 hours). Deaths in 5 patients were assessed as possibly related to meropenem; 36 (1.2%) patients had meropenem discontinued because of adverse events. Many patients in these trials were severely ill and had multiple background diseases, physiological impairments and were receiving multiple other drug therapies. In the seriously ill patient population, it was not possible to determine the relationship between observed adverse events and therapy with meropenem.

The following adverse reaction frequencies were derived from the clinical trials in the 2904 patients treated with meropenem. …

Drug interactions

Probenecid competes with meropenem for active tubular secretion, resulting in increased plasma concentrations of meropenem. Co-administration of probenecid with meropenem is not recommended.

Case reports in the literature have shown that co-administration of carbapenems, including meropenem, to patients receiving valproic acid or divalproex sodium results in a reduction in valproic acid concentrations. The valproic acid concentrations may drop below the therapeutic range as a result of this interaction, therefore increasing the risk of breakthrough seizures. Although the mechanism of this interaction is unknown, data from

in vitro and animal studies suggest that carbapenems may inhibit the hydrolysis of valproic acid's glucuronide metabolite (VPA-g) back to valproic acid, thus decreasing the serum concentrations of valproic acid. If administration of meropenem is necessary, then supplemental anti-convulsant therapy should be considered

.

About this medicine

Meropenem for injection is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxilic acid trihydrate. Its empirical formula is C

17H

25N

3O

5S∙3H

2O with a molecular weight of 437.52. Its structural formula is:

Meropenem for injection is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3.

Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether.

When re-constituted as instructed, each 1 gram meropenem for injection vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq)

. …

Disclaimer: This page is for general information only and is not medical advice. It is a condensed summary of the official FDA-approved label — it does not replace the full prescribing information or the advice of your doctor or pharmacist. Always follow your prescriber's instructions and read the medication guide that comes with your medicine.

Source: FDA-approved label via DailyMed (U.S. National Library of Medicine), label set ID 31dd2160-7dbd-51fa-e054-00144ff88e88. Read the full official label on DailyMed.

Related medicines

Amoxicillin Azithromycin Doxycycline Amoxicillin and Clavulanate Cephalexin Valacyclovir Sulfamethoxazole and Trimethoprim Nitrofurantoin