Dalbavancin

Active ingredient: Dalbavancin Hydrochloride

In short: Dalbavancin for injection is indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of the following Gram-positive microorganisms: Staphylococcus aureus (including methicillin-susceptible a

Forms & strengthsDalbavancin for injection is supplied as a white/off-white to pale yellow lyophilized sterile powder for reconstitution in a single-dose clear glass vial containing dalbavancin hydrochloride equivalent to 500 mg of dalbavancin.
LabelTeva Pharmaceuticals, Inc.
Label updatedNov 18, 2025

What is Dalbavancin used for?

Dalbavancin for injection is indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of the following Gram-positive microorganisms: Staphylococcus aureus (including methicillin-susceptible and methicillin-resistant isolates), Streptococcus pyogenes, Streptococcus agalactiae, Streptococcus dysgalactiae, Streptococcus anginosus group (including S. anginosus, S. intermedius, S

.

constellatus) and Enterococcus faecalis (vancomycin susceptible isolates).

To reduce the development of drug-resistant bacteria and maintain the effectiveness of dalbavancin for injection and other antibacterial agents, dalbavancin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Dalbavancin dosage

The recommended dosage regimen of dalbavancin for injection in adult patients with CLcr 30 mL/min and above is 1,500 mg, administered as a single dose regimen. Administer dalbavancin for injection over 30 minutes by intravenous infusion. For adult patients with CLcr less than 30 mL/min, dosage adjustment is required .

The recommended dosage regimen of dalbavancin for injection in pediatric patients with CLcr 30 mL/min/1.73m2 and above is a single dose regimen based on the age and weight of the pediatric patient (Table 1). Administer dalbavancin for injection over 30 minutes by intravenous infusion.

There is insufficient information to recommend dosage adjustment for pediatric patients younger than 18 years with CLcr less than 30 mL/min/1.73m2 .

Age Range | Dosage (Single Dose Regimen)

Birth to less than 6 years | 22.5 mg/kg (maximum 1,500 mg)

6 to less than 18 years | 18 mg/kg (maximum 1,500 mg)

*Estimate CLcr or glomerular filtration rate (GFR) using an age-appropriate equation accepted for pediatric

patients (birth to less than 18 years old) to define renal function impairment.

In adult patients with renal impairment whose known CLcr is less than 30 mL/min and who are not receiving regularly scheduled hemodialysis, the recommended dosage regimen of dalbavancin for injection is 1,125 mg, administered as a single dose regimen.

No dosage adjustment is recommended for adult patients receiving regularly scheduled hemodialysis, and dalbavancin for injection can be administered without regard to the timing of hemodialysis .

Dalbavancin for injection must be reconstituted with either Sterile Water for Injection, USP, or 5% Dextrose Injection, USP, and subsequently diluted only with 5% Dextrose Injection, USP, to a final concentration of 1 mg/mL to 5 mg/mL.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

Reconstitution: Dalbavancin for injection must be reconstituted under aseptic conditions, using 25 mL of either Sterile Water for Injection, USP, or 5% Dextrose Injection, USP, for each 500 mg vial. To avoid foaming, alternate between gentle swirling and inversion of the vial until its contents are completely dissolved. Do not shake. The reconstituted vial contains 20 mg/mL dalbavancin as a clear, colorless to yellow solution.

Reconstituted vials may be stored either refrigerated at 2°C to 8°C (36°F to 46°F), or at controlled room temperature 20°C to 25°C (68°F to 77°F). Do not freeze.

Dilution:

Adult Patients: Aseptically transfer the required dose of reconstituted dalbavancin for injection solution from the vial(s) to an intravenous bag or bottle containing 5% Dextrose Injection, USP. …

How to take Dalbavancin — instructions & advice from the label

Allergic Reactions

Advise patients that allergic reactions, including serious allergic reactions, could occur with dalbavancin for injection, and that serious allergic reactions require immediate treatment. Patients should inform their healthcare provider about any previous hypersensitivity reactions to dalbavancin for injection, or other glycopeptides .

Diarrhea

Advise patients that diarrhea is a common problem caused by antibacterial drugs, including dalbavancin for injection and usually resolves when the drug is discontinued. Sometimes, frequent watery or bloody diarrhea may occur and may be a sign of a more serious intestinal infection. If severe watery or bloody diarrhea develops, patients should contact their healthcare provider .

Development of Drug-Resistant Bacteria

Patients should be counseled that antibacterial drugs including dalbavancin for injection should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). …

Warnings & precautions

Do not take this medicine if: Dalbavancin for injection is contraindicated in patients with known hypersensitivity to dalbavancin.

Serious hypersensitivity (anaphylactic) and skin reactions have been reported in patients treated with dalbavancin for injection. If an allergic reaction to dalbavancin for injection occurs, discontinue treatment with dalbavancin for injection and institute appropriate therapy for the allergic reaction. Before using dalbavancin for injection, inquire carefully about previous hypersensitivity reactions to other glycopeptides. Due to the possibility of cross-sensitivity, carefully monitor for signs of hypersensitivity during treatment with dalbavancin for injection in patients with a history of glycopeptide allergy .

Dalbavancin for injection is administered via intravenous infusion, using a total infusion time of 30 minutes to minimize the risk of infusion-related reactions. Rapid intravenous infusions of dalbavancin for injection can cause flushing of the upper body, urticaria, pruritus, rash, and/or back pain. Stopping or slowing the infusion may result in cessation of these reactions.

In Phase 2 and 3 clinical trials, more dalbavancin for injection than comparator-treated subjects with normal baseline transaminase levels had post-baseline alanine aminotransferase (ALT) elevation greater than 3 times the upper limit of normal (ULN). Overall, abnormalities in liver tests (ALT, AST, bilirubin) were reported with similar frequency in the dalbavancin for injection and comparator arms .

Clostridioides

difficile-associated diarrhea (CDAD) has been reported in users of nearly all systemic antibacterial drugs, including dalbavancin for injection, with severity ranging from mild diarrhea to fatal colitis. Treatment with antibacterial agents can alter the normal flora of the colon and may permit overgrowth of C. difficile.

C

. …

Dalbavancin side effects

The following clinically significant adverse reactions are also discussed elsewhere in the labeling:

Hypersensitivity Reactions

Infusion Related Reactions

Hepatic Effects

Clostridioides difficile-associated Diarrhea

Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in clinical trials of dalbavancin for injection cannot be directly compared to rates in the clinical trials of another drug and may not reflect rates observed in practice.

Clinical Trials Experience in Adult Patients

Adverse reactions were evaluated for 2,473 patients treated with dalbavancin for injection: 1,778 patients were treated with dalbavancin for injection in seven Phase 2/3 trials comparing dalbavancin for injection to comparator antibacterial drugs and 695 patients were treated with dalbavancin for injection in one Phase 3 trial comparing dalbavancin for injection single-dose and another dalbavancin dosing regimen. The median age of patients treated with dalbavancin for injection was 48 years, ranging between 16 and 93 years. Patients treated with dalbavancin for injection were predominantly male (59.5%) and White (81.2%).

Serious Adverse Reactions and Adverse Reactions Leading to Discontinuation

Serious adverse reactions occurred in 121/2,473 (4.9%) of patients treated with any regimen of dalbavancin for injection. …

Drug interactions

Drug-laboratory test interactions have not been reported. Dalbavancin for injection at therapeutic concentrations does not artificially prolong prothrombin time (PT) or activated partial thromboplastin time (aPTT).

No clinical drug-drug interaction studies have been conducted with dalbavancin for injection. There is minimal potential for drug-drug interactions between dalbavancin for injection and cytochrome P450 (CYP450) substrates, inhibitors, or inducers .

About this medicine

Dalbavancin for injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species.

Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below).

Figure 1. Dalbavancin Structural Formula

Dalbavancin | R1 | R2 | Molecular Formula | Molecular Weight*

A0 | CH(CH3)2 | H | C87H98N10O28Cl2 · 1.6 HCl | 1,802.7

A1 | CH2CH2CH3 | H | C87H98N10O28Cl2 · 1.6 HCl | 1,802.7

B0 | CH2CH(CH3)2 | H | C88H100N10O28Cl2 · 1.6 HCl | 1,816.7

B1 | CH2CH2CH2CH3 | H | C88H100N10O28Cl2 · 1.6 HCl | 1,816.7

B2 | CH2CH(CH3)2 | CH3 | C89H102N10O28Cl2 · 1.6 HCl | 1,830.7

*Anhydrous free base

The B0 INN chemical name is: …

Disclaimer: This page is for general information only and is not medical advice. It is a condensed summary of the official FDA-approved label — it does not replace the full prescribing information or the advice of your doctor or pharmacist. Always follow your prescriber's instructions and read the medication guide that comes with your medicine.

Source: FDA-approved label via DailyMed (U.S. National Library of Medicine), label set ID 1f4a5924-96d7-445a-b75f-2c0e1ffd2dea. Read the full official label on DailyMed.